Incorrect Construction Logistics Programme Template Applied to Job

Owned by Mitch Robinson (Deactivated)
Last updated: May 05, 2017 by Sam Pitts
2 min read


      

  *Clicking image will take you back to troubleshooting article list


This article describes a solution to the error as shown below:

You may encounter a situation where you accidentally apply the incorrect Construction Logistics Programme Template to a job.

There are two possible scenarios with two possible solutions:

  1. There has not yet been any data entered into the template. (No dates appear in the Called, Called For, Actual Start or Actual Complete columns on the Construction>Logistics screen in Framework ECM - Production Management Module.

  2. Data has been entered into the template. (Dates do appear in the Called, Called For, Actual Start or Actual Complete columns on the Construction>Logistics screen in Framework ECM - Production Management Module.)


    If you are unsure whether data has yet been entered, press the Print Preview button and print report #5152 - Construction Logistics Job Programme so that you have a copy of any dates that may have been entered, in case they need to be re-entered after applying the correct Programme Template.

Solutions:

Scenario One:

If there has not yet been any data entered into the programme using this template, resolving this issue is simply a matter of replacing the template with the correct one. You can do this by following the steps below:


  1. Open Framework ECM

  2. Browse to Construction>Logistics




  3. Click the Template button and then click Yes






  4. Select the correct template from your list, and press Ok.

  5. The correct template has now been applied.


Scenario Two:

If there has already been data entered into the programme using this template, the resolution will be taking note of what dates have been already entered, you can do this by following the steps below.

  1. Open Framework ECM

  2. Browse to Construction>Logistics



  3. Click Print Preview and print or save report #5152 - Construction Logistics Job Programme




  4. Click the Template button and then click Yes





  5. Select the correct template from your list, and press Ok.

  6. Re-enter the dates from the report that you have printed or saved, using the correct template.



Contact Us

If you are still having issues in relation to this, or any other Framework related issue Contact Us.