Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Tip

If during the upgrade process 'Not Responding' appears in the title bar of the Framework Upgrade software, this is due to the system performing very long and CPU-intensive calculations. This message will disappear once the upgrade has been completed.

Framework ECM 7.1.1 Database Upgrade

This is a two-step process:

Framework ECM 7.1.0.21 Upgrade

  1. Open Windows Explorer.
  2. Browse to: \[fw folder]\Upgrade\Upgrade_v7_1_0_21\ECM\
  3. Double-click the FworkECMUpgrade.exe file. A Database Backup confirmation prompt will be displayed.
  4. Click Yes to confirm that a manual backup of the Framework ECM database has been performed (if a manual backup has not been performed, see Step 5 - Backup Framework ECM Database). The Start Upgrade confirmation prompt will be displayed.
  5. Click Yes to perform the upgrade.
  6. If the upgrade was successful, a successfully completed message prompt will be displayed.
  7. Click OK.
  8. Click Close.

Framework ECM 7.1.1.05 Upgrade

  1. Open Windows Explorer.
  2. Browse to: \[fw folder]\Upgrade\Upgrade_v7[_x1_x1_xx]05\ECM\
  3. Double-click the FworkECMUpgrade.exe file. A Database Backup confirmation prompt will be displayed.
  4. Click Yes to confirm that a manual backup of the Framework ECM database has been performed (if a manual backup has not been performed, see Step 5 - Backup Framework ECM Database). The Start Upgrade confirmation prompt will be displayed.
  5. Click Yes to perform the upgrade.
  6. If the upgrade was successful, a successfully completed message prompt will be displayed.
  7. Click OK.
  8. Click Close.

...

  1. Open Windows Explorer.
  2. Browse to: \[fw folder]\Upgrade\Upgrade_v7[_xX_xX_xx]\ECM\
  3. Right-click on FworkECMUpgrade.exe and select Create Shortcut. A shortcut to the executable will be created.
  4. Right-click on the new shortcut and select Properties. The Properties dialog will be displayed.
  5. On the Shortcut tab, edit the Target field and include the command line switch -skipDBAdmin at the end of the line. The target should look similar to the following:
     "C:\Framework\Upgrade\Upgrade_v7[_1X_1X_[xx]\ECM\FworkECMUpgrade.exe" -skipDBAdmin
  6. Click the OK button. The Properties dialog will close.

...