Working on an inspection

Onsite Inspect Release Information
Details of the features that were delivered in specific platform releases and details of what is in the Roadmap for the product.

Onsite Inspect FAQ
Articles in this section provide answers to frequently asked questions on the Onsite Inspect appliances.

Onsite Inspect Resource Centre

Onsite Inspect Ideas Portal

PLATFORM RESOURCE CENTRE

1. From the Projects screen touch the project you want to work on

The Inspections screen shows you the inspections that have been allocated to your project.

1. The name of the inspection.

2. The status (workflow) of the inspection

3. The dot indicates that there is information in this inspection that you have not viewed.

4. The number of items added to the inspection

5. Information on the inspection.

6. The synchronisation status of the inspection. If it is green it means all information has been uploaded to the web portal. If it is orange then it means that there is information on the inspection that has not yet been sent to the portal.

7. When data was last sent from your app to the web portal.
   
   If there is information that has not been sent you will see the symbol as amber
   

   

   If you do a pull to refresh on this screen it will force the app to send. The icon should turn green.
   
   

   

When you open the inspection for the first time it will look as shown to the left.

1. Press this to add an item to the inspection.

2. Pressing this icon will submit the inspection.

To add an item to the inspection;

1. Press the + icon.

2. Select whether you are going to take a photo or select a photo that you have already taken.

In our example, we will assume that you are taking a picture of the item that you want to be raised on the inspection. To make it clear where the issue is as a minimum you should take 2 photos. One of them a close-up of the issue and the next a broader photo that allows the inspector to see the location of the item in relation to the rest of the area.

You will then see the image that you have taken. If you are happy with the image select Use Photo. If the image is blurred or does not show the defect properly then select Retake.

You can then annotate the photo.

1. You can draw on the photo using your finger. It is suggested that if it is not immediately apparent that you circle the issue or draw an arrow pointing to it.

2. Pressing Clear will remove any annotations that you have made.

3. Pressing Rotate will rotate the image.

4. Pressing Delete will clear the image and return you to the inspection screen.

5. Pressing Next will allow you to take another photo.

6. Pressing Done will save the picture(s) and display the items detail screen.

1. The Name will automatically populate with the number of the item that you are adding. There is no need to change this.

2. When you press the Location area you will get a selection spinner at the bottom of the screen.
   

   

   Locate the area/room where the defect is and press Done.

3. Add any notes relating to the location.

4. When you press the Location area you will get a selector at the bottom of the screen.
   

   

5. Add a Description of the issue.
   
   When you have finished press Save at the top right of the screen.

You will then see the item in the Inspections screen.

1. The amber icon shows this item has not been uploaded to the web portal.

2. Shows when the data from your inspection was last uploaded to the web portal.
   

As you add items you will see them in the Inspection view. They will be sorted into the locations where you have added them. If you have put an item in the wrong location you can change this.

1. Press the action button.
2. Select Edit.
3. Change the location.
4. Press Save.

When you have finished adding items to the inspection you should submit it for processing by your builder.

1. Press action.

2. Press Submit Inspection.

1. Optionally you can put some notes with your submission.

2. Write your signature. If you make a mistake use the Clear option at the bottom of the screen.

3. Press submit.

You will then see a message advising you that you will not be able to make any changes once the inspection is submitted. Provided you are happy press Submit.

The status of your inspection will be moved to Pending Review.

Click here to see the possible statuses of your inspections and what they mean.